One module used in one inverter for monitoring, you can monitor the power production status through internet and phone.
Connect with inverters on its RS232 port, no additional external hardware
WiFi (802.11 b/g/n) communication according to user requirements
Remote monitoring via SolarMAN Portal
Able to upgrade software of inverter via WiFi
Optimized configuration interface makes setting procedures easier and faster
The new generation of WiFi Plug enables operation under AP and STA mode simultaneously, which means that users can directly get access to the internal Web Server via WiFi, and at the same time the module can connect to remote portal via WiFi, enabling users to monitor PV systems anytime and anywhere via Internet.
| Model | WiFi Plug |
| Communication | |
| Inverter communication | RS232 |
| Remote communication | WiFi (802.11 b/g/n) |
| Max supporting number of inverter | 1pc |
| Communication rate | 9600 |
| WiFi communication range | 100m in outdoor open area without obstruction |
| Data collection intervals | 5 (default)/1~15 (Optional) |
| Firmware updates | Wireless |
| Data access | WiFi point-to-point/remote server |
| Preferences setting | Web server |
| Power Source | Powered by RS232 port on inverter |
| Environmental | |
| Operating temperature (℃) | -25~+60 |
| Operating temperature (℃) | -40~+80 |
| Protection class | IP65 |
| General | |
| Certificates | FCC\CE\C-tick |
| Dimension (W*D*H mm) | 80*85*22 |
